NMX-ENC-N1115-WP Wallplate Encoder Minimal Proprietary Compression Video Over IP N1115 MPC Decor Style Wallplate Encoder with KVM

N1000 Series AV-over-IP Encoder Solution

The N1000 Series Encoders and Decoders deliver a cost-effective, local AV-over-IP switching platform that converts video into a lightly compressed IP stream. This approach maintains outstanding image quality while achieving very low latency. The technology is well suited for point-to-point video distribution, compact 2×1 switching setups, and scalable matrix systems up to 32×32, all operating on standard, off-the-shelf Layer 3 network switches.

The NMX-ENC-N1115-WP brings the high-performance encoding capabilities of the NMX-ENC-N1133 into a convenient 2-gang wallplate design. It is designed for simple installation in walls, lecterns, or floor boxes using a standard US 2-gang back box, and requires only a single category cable to supply both power and network connectivity.

Typical Applications

The NMX-ENC-N1115 is ideal for video distribution and matrix systems smaller than 32×32. Common use cases include:

• Conference rooms

• Huddle spaces

• Lecterns (installed inside or adjacent to the furniture)

Key Features

• Ultra-Low Latency: Combined encoding and decoding latency of just 10 ms at 60 fps.

• Minimal Proprietary Compression (MPC): Visually lossless compression applied across all supported resolutions.

• Wallplate Design: Fits neatly into a standard 2-gang US back box for wall, floor, or lectern mounting.

• Power over Ethernet (PoE): Eliminates the need for a local power adapter.

• Flexible System Design: Supports point-to-point links, simple switching, or economical matrices up to 32×32.

• Dedicated Inputs: Separate HDMI and VGA connectors for versatile source connectivity.

Specifications

Video

• Digital Inputs: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)*

• Analog Inputs: HD-15 VGA, Component*

• Supported Formats: HDMI, DVI-D*, DP++*, HDCP, RGBHV, YPbPr

• Progressive Resolutions: Most common HD formats up to 1920×1200

• Interlaced Resolutions: 1080i60

• Analog Resolutions: Up to 1920×1200 @ 60 Hz (also supports 59.94 Hz)

• Output Resolution: Matches input

• A/D Conversion: 8-bit, 165 MHz per color channel

• Color Sampling: 4:2:2

Supported via passive adapters. Composite and S-Video (YC) are not supported.

Audio

• Inputs: Embedded HDMI audio (DVI-D via adapter) or analog stereo

• Output: Ethernet

• Audio Formats: 8-channel PCM, 2-channel stereo

• A/D Conversion: 16-bit at 32 kHz, 44.1 kHz, and 48 kHz

Performance

• Latency: 10 ms at 60 fps (encode + decode)

• Bandwidth: Approximately 840 Mb/s (resolution dependent)

Note: Network latency is additional. Scaling introduces one extra frame of latency (17 ms at 60 fps).

Communications

• Ethernet: 10/100/1000 Mbps, auto-negotiating, DHCP, Auto IP, Static IP

• HDMI: HDCP support and EDID management

Connections

• P0 (RJ45): Gigabit Ethernet port for network, AV streaming, and PoE

• HDMI IN: Digital video input

• VGA IN: DB15 analog video input

• USB Host: USB-B

• USB Maintenance: Mini-USB

Controls and Indicators (Front Panel)

• Reset Button: Recessed; performs a warm restart without changing settings

• Power LED: Green when powered

• Audio LED: Green when audio is active

• Analog Video LED: Green when analog video is present

• Digital Video LED: Green when digital video is present

• HDCP LED: Green when HDCP content is detected

• Stream LED: Green during active video streaming

• Status LED: Flashing green when operational

• Link/Activity LED: Flashing yellow during network activity

Power

• Power over Ethernet: IEEE 802.3af Class 3 / 802.3at Type 1

• Can be powered by a PoE-enabled switch or injector

• Point-to-point encoder-to-decoder setups require a PoE injector

PoE must originate from a compliant Power Sourcing Equipment (PSE) port and is intended for intra-building use only.

Environmental

• Operating Temperature: 0°C to 40°C (32°F to 104°F)

• Storage Temperature: -30°C to 70°C (-22°F to 158°F)

• Operating Humidity: 10%–90% RH, non-condensing

• Storage Humidity: 0%–90% RH, non-condensing

• Heat Output: Up to ~26 BTU/hr

General

• Dimensions (H × W × D): 4.06" × 3.5" × 2.25" (10.31 × 8.84 × 5.72 cm)

• Weight: 0.75 lb (0.34 kg)

• Cooling: Passive convection through front, rear, and top vents

Installation and Compliance

• Mounts to standard US 2-gang back boxes

• Compatible with décor-style wallplates (not included)

• Certifications: FCC, CE, NTRL

Accessories and Compatibility

• Compatible with NMX-ENC-N1222, NMX-ENC-N1233, NMX-ENC-N1512, and NMX-NVR-N6123

• Recommended PoE Injector: PS-POE-AT-TC (FG423-84), 802.3at compliant

Ordering Information

• FGN1115-WP-WH – White

• FGN1115-WP-BL – Black