Questions? Feedback? powered by Olark live chat software

Yamaha TF1 16 Channel Digital Mixer

SKU:
TF1
UPC:
086792992914
Availability:
Shipping date subject to product availability.
Shipping:
Free Shipping
  • Yamaha TF1 16 Channel Digital Mixer
  • Yamaha TF1 16 Channel Digital Mixer
  • Yamaha TF1 16 Channel Digital Mixer
  • Yamaha TF1 16 Channel Digital Mixer
MSRP: $2,585.00
$2,199.99
— You save $385.01

Description

Compact, portable, and even rack mountable, the TF1 offers impressive capability and versatility for smaller systems.

  • 17 motor faders (16 channels + 1 master)
  • 40 input mixing channels (32 mono + 2 stereo + 2 return)
  • 20 Aux buses (8 mono + 6 stereo) + Stereo + Sub
  • 8 DCA groups with Roll-out
  • 16 analog XLR/TRS combo mic/line inputs + 2 analog RCA pin stereo line inputs
  • 16 analog XLR outputs
  • 34 x 34 digital record/playback channels via USB 2.0 + 2 x 2 via a USB storage device
  • 1 expansion slot for NY64-D audio interface card

Specs

Outline

Fader Configuration 16 + 1 (Master)
Mixing CapacityInput Channels 40 (32 mono + 2 stereo + 2 return)
Aux Buses 20 (8 mono + 6 stereo)
Stereo Buses 1
Sub Buses 1
Input channel functions 8 DCA Groups
I/OInputs 16 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)
Outputs 16 (XLR)
Expansion slots 1
On-board processorsDSP 8 Effects + 10 GEQ
USB 34x34 USB Audio Interface, 2-track recording via USB Storage Device

General specifications

Sampling frequency rateInternal 48 kHz
Signal delay Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Fader 100 mm motorized, Resolution = 10-bit, +10 dB to 138 dB,dB all faders
Total harmonic distortion Less than 0.05% 20 Hz20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a 18 dB/octave filter@80 kHz)
Frequency response +0.5, 1.5 dB 20 Hz20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT
Dynamic range 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.
Humnoise levelEquivalent input noise 128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)
Residual output noise 85 dBu, ST master off (Measured with an A-Weight filter)
Crosstalk 100 dB (Measured with a 30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.
Power requirements 100240 V 50/60 Hz
Power consumption 100 W
DimensionsW 510 mm (20.1in)
H 225 mm (8.9in)
D 599 mm (23.6in)
Net weight 13.5 kg (29.8lb)
Accessories Quick Guide, Power Cord, CUBASE AI download information
Options Rack-mount Kit RK5014, Expansion Card, Foot Switch (FC5)
Others Operating temperature range: 040 C, Storage temperature range: -2060 C

Analog input characteristics

Input TerminalsGAINLoad
Impedance		For Use With
Nominal		Input LevelConnectorbalanced /
Unbalanced
Sensitivity*1NominalMax. before clip
INPUT1-16 +66dB 7.5K 50-600 Mics
or 600Lines		 -82dBu (61.6 V) -62dBu (0.616mV) -42dBu (6.16mV) Combo Jack (XLR-3-31 type *2
or TRS phone *3)		 Balanced
-6dB -10dBu (245mV) +10dBu (2.45V) +30dBu (24.5V)
ST IN 1,2   10k 600Lines -30dBV (31.6 V) -10dBV (316mV) +10dBV (3.16V) RCA Pin Jack Unbalanced

*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal output level when the unit is set to maximum gain. (All faders and level controls are at maximum position.)
*2. 1: GND, 2: HOT, 3: COLD
*3. Tip: HOT, Ring: COLD, Sleeve: GND
*In these specifications, 0dBu = 0.775Vrms.
*+48V DC (phantom power) can be supplied to INPUT XLR type connectors via each individual software controlled switch.

Analog output characteristics

Output TerminalsSource
Impedance		For Use With
Nominal		GAIN SWOutput LevelConnectorbalanced /
Unbalanced
NominalMax. before clip
OMNI OUT 1-16 75 600 Lines +24dBu position (default) +4dBu (1.23 V) +24dBu (12.3 V) XLR-3-32 type *1 Balanced
PHONES *3 100 40 Phones   3mW 75mW Stereo Phone Jack (TRS) *2 Unbalanced

*1.1: GND,2: HOT, 3: COLD
*2 Tip: LEFT, Ring: RIGHT, Sleeve: GND
*3 The position of the level control is lowered by 16dB from the maximum.
*In these specifications, 0dBu = 0.775Vrms.
*All output DA converters are 24bit, 128times oversampling.

Digital input/output specifications

TerminalsFormatData lengthAudioConnector
USB (TO HOST) USB 24bit 34ch input / 34ch output, PCM USB (B type)
iPad USB   Playback: MP3 or WAV file data / Record: WAV file data USB (A type)

Control I/O specifications

TerminalsFormatLevelConnector
NETWORK IEEE802.3 10BASE-T/100Base-TX RJ-45
FOOT SW     TS Phone
View AllClose

Warranty Information

See manufacturer's website for warranty information
View AllClose

Additional Information

Type:
Digital
Format:
Compact
Inputs:
XLR
Inputs:
1/4-inch
Inputs:
RCA
reverb_shipping_profile:
default free shipping
reverb_offers:
off
reverb_sync:
off
View AllClose

Related Products